Advertisement
ASSEMBL
ASSEMBL Y Y Y Y Y
ASSEMBL
ASSEMBL
ASSEMBL
S S S S S TEP 3:
TEP 3:
TEP 3:
TEP 3:
TEP 3:
Slide the engine mount arm assembly (A) into
the outer motor mount assembly (B). Secure the
engine mount arm assembly (A) using (1)
detent pin (PN#J0248). After the engine
mount arm assembly (A) is secure, place the
engine (C) onto the engine mount arm
assembly. Secure the engine (C) to the engine
mount arm assembly (A) by using (4)
5/16"-18 x 1-1/2" hex bolts (PN#K1157) and
(4) 5/16"-18 flange nuts (PN#K1178).
S S S S S TEP 4:
TEP 4:
TEP 4:
TEP 4:
TEP 4:
To mount the boot (A) & the boot plate (B), place the
boot plate on the boot. Secure the boot plate (B) to the
boot by using (2) 3/8"-16 x 1" carriage bolts
(PN#K1182) and (2) 3/8"-16 flange nuts (PN#K1215).
Place the head of the carriage bolt from the inside of
the boot. The hex nut will be on top of the boot plate.
Next slide the boot plate (B) under the nuts and bolts
holding the deflector shield on to the deck.
S S S S S TEP 5:
TEP 5:
TEP 5:
TEP 5:
TEP 5:
Mount the left and right weight brackets (A) to
the mower using (2) 3/8"-16 u-bolts (B)
(PN#K1419) and (4) 3/8"-16 flange nuts
(PN#K1215). Using a floor jack, secure the weight
(C) to the weight brackets (A) using (4) 1/2"-13
u-bolts (D) (PN#K0331) and (8) 1/2"-13 flange
nuts (PN#K1215). Use (2) of the 1/2"-13 u-bolts
(D) on the left bracket (A) and (2) 1/2"-13 u-bolts
(D) on the right bracket (A). Use the pictures for
more detail.
MODEL 3
MODEL 3
MODEL 3
MODEL 3
MODEL 37 7 7 7 7 62
621 1 1 1 1 2 2 2 2 2 1 1 1 1 1 3 - 1
62
62
62
3 - 16 6 6 6 6
3 - 1
3 - 1
3 - 1
SCA A A A A G TURF TIGER
SC
SC
SC
SC
G TURF TIGER
G TURF TIGER
G TURF TIGER
G TURF TIGER
B
A
A
B
C C D
D
A
PEC
PEC O O O O O
PEC
PEC
PEC
C
B
B
A
PECO
PECO
PECO
PECO
PECO
7 7 7 7 7
Advertisement
