Page 1
RC–AAS01 SX–R1800 • This Service Manual is the “Revision Publishing” and replaces “Simple Manual” XH-A1000 (EZ,K), (S/M Code No. 09-005-421-4T2). • If requiring information about the CD mechanism, see Service Manual of AZG-1 (S/M Code No. 09-001-335-3N8). S/M Code No. 09-006-421-4R2...
All manuals and user guides at all-guides.com TABLE OF CONTENTS SPECIFICATIONS ..............................3 PROTECTION OF EYES FROM LASER BEAM DURING SERVICING ............4 NOTE ON BEFORE STARTING REPAIR ....................5 ~ 6 DISASSEMBLY INSTRUCTIONS ........................7 ~ 8 ELECTRICAL MAIN PARTS LIST ......................9 ~ 16 TRANSISTOR ILLUSTRATION ..........................
All manuals and user guides at all-guides.com SPECIFICATIONS Main unit CX-A1000 <Cassette deck section> <FM Tuner section> Track format 4 tracks, 2 channels stereo Tuning range 87.5 MHz to 108 MHz Frequency response CrO2 tape: 50 Hz – 16000 Hz Usable sensitivity (IHF) 16.8 dBf Normal tape: 50 Hz –...
All manuals and user guides at all-guides.com PROTECTION OF EYES FROM LASER BEAM DURING SERVICING This set employs laser. Therefore, be sure to follow carefully CAUTION the instructions below when servicing. Use of controls or adjustments or performance of proce- dures other than those specified herin may result in WARNING!! hazardous radiation exposure.
All manuals and user guides at all-guides.com NOTE ON BEFORE STARTING REPAIR 1. Forced discharge of electrolytic capacitor of power supply block When repair is going to be attempted in the set that uses relay circuit in the power supply block, electric potential is kept charged across the electrolytic capacitors (C101, 102) even though AC power cord is removed.
Page 6
All manuals and user guides at all-guides.com In such a case, check also if the POWER AMPLIFIER circuit or power supply circuit has any abnormalities or not. 2-2. Regarding reset There are cases that the machine does not work correctly because the MICROCOMPUTER is not reset even though the AC power cord is re-inserted, or the software reset (pressing the STOP key + POWER key) is performed.
All manuals and user guides at all-guides.com DISASSEMBLY INSTRUCTIONS CD disassembling procedure 1. Remove the 19 screws (Ax11, Bx8) and remove the CABI, STEEL. CABI, STEEL 2. Remove the 3 screws from the bottom of the unit. 3. Remove the 4 screws (Ex2, Fx2) from both sides. –...
Page 8
All manuals and user guides at all-guides.com 4. Remove the 20 screws (Cx18, Dx2) and remove the 7. Remove the CHAS, 3CD together with the AZG-1. CABI, REAR ASSY. CHAS, 3CD CABI, REAR ASSY 5. Remove the 6 FFCs from the PWB, CONNECT. 8.
All manuals and user guides at all-guides.com ELECTRICAL MAIN PARTS LIST REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION 87-A40-270-080 C-DIODE,MC2838 87-A40-313-080 C-DIODE,MC2840 87-020-454-010 IC,DN6851 87-070-274-080 DIODE,1N4003 SEM 87-A21-406-040 C-IC,LC87F65C8A 87-020-465-080 DIODE,1SS133 87-A21-419-040 IC,NJM14558MD-TE2 87-A40-488-080 DIODE,1SS244 87-A20-914-010 IC,SPS-442-1-F 87-A20-355-010...
Page 10
All manuals and user guides at all-guides.com REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION C238 87-010-322-080 C-CAP,S 100P-50 CH C422 87-012-140-080 CAP,470P C300 87-018-209-080 CAP,TC U 0.1-50 ZF C451 87-010-401-080 CAP,ELECT 1-50V C303 87-012-157-080 C-CAP,S 330P-50 CH C452 87-010-401-080 CAP,ELECT 1-50V...
Page 11
All manuals and user guides at all-guides.com REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION C811 87-010-070-080 CAP,ELECT 0.47-50V CN605 87-A60-189-010 CONN,16P TUC-P16P-B1 C812 87-010-070-080 CAP,ELECT 0.47-50V CN606 87-A60-621-010 CONN,4P V 2MM JMT C813 87-010-401-080 CAP,ELECT 1-50V CN607 87-A60-140-010 CONN,15P V FE...
Page 12
All manuals and user guides at all-guides.com REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION C253 87-010-193-080 C-CAP,S 0.033-25 ZF C185 87-010-197-080 CAP,CHIP 0.01 DM C261 87-012-140-080 C-CAP,S 470P-50 J CH C186 87-010-182-080 C-CAP,S 2200P-50 B C262 87-012-140-080 C-CAP,S 470P-50 J CH...
Page 13
All manuals and user guides at all-guides.com REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION S345 87-A90-095-080 SW,TACT EVQ11G04M C403 87-010-405-080 CAP,ELECT 10-50V S346 87-A90-095-080 SW,TACT EVQ11G04M C404 87-010-405-080 CAP,ELECT 10-50V S347 87-A90-095-080 SW,TACT EVQ11G04M C405 87-010-186-080 CAP,CHIP 4700P S348...
Page 14
All manuals and user guides at all-guides.com REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION TH702 87-A91-042-080 C-THMS,100K 55001 C713 87-012-286-080 CAP,U 0.01-25 C714 87-012-286-080 CAP,U 0.01-25 C715 87-012-195-080 C-CAP,U 100P-50CH VIDEO I/O C.B C717 87-012-286-080 CAP,U 0.01-25 C719 87-012-286-080...
Page 15
All manuals and user guides at all-guides.com REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION C864 87-010-405-080 CAP,E 10-50 M 11L SME PR10 87-026-682-080 PROTECTOR,10A 491 SERIES 60V C865 87-010-196-080 C-CAP,S 0.1-25 ZF 8A-MTM-612-010 PT,AMT-M EZ C866 87-010-405-080 CAP,E 10-50 M 11L SME...
Page 16
All manuals and user guides at all-guides.com CHIP RESISTOR PART CODE Chip Resistor Part Coding Figure Resistor Code Value of resistor Chip resistor Dimensions (mm) Wattage Type Tolerance Symbol Resistor Code Form 1/16W 1005 0.35 1/16W 1608 0.45 1/10W 2125 1.25 0.45 1/8W...
All manuals and user guides at all-guides.com TRANSISTOR ILLUSTRATION E C B E C B B C E B C E 2SA952 DTC114ES 2SB1588 2SB1370 CC5551 KTC3199 2SD2439 CSA1585 FN1016 CSC4115 FP1016 CSD655 KTA1266 KTC3198 G D S G D S 2SA1235 DTA123JK 2SK2158...
All manuals and user guides at all-guides.com IC DESCRIPTION IC, LC87F65C8A Pin No. Pin Name Description Clock output for MAIN, FRONT IC. DATA Data output for MAIN, FRONT IC. STB(M) Strobe output for MAIN's IC. SR-STB Strobe output for video switch controller. STB(FRONT) Strobe output for FRONT LED controller.
Page 45
All manuals and user guides at all-guides.com Pin No. Pin Name Description –VP – –30V supply. P33 / LVL-B FL segment driver output / Level meter input timing control-B. P32 / LVL-C FL segment driver output / Level meter input timing control-C. P31 / RHYTHM FL segment driver output / Initial select rhythm.
Page 46
All manuals and user guides at all-guides.com IC, LC72131D Pin No. Pin Name Description A crystal oscillator (4.5MHz) is connected between these pins. XOUT – Not connected. To enable the IC. Active "H". Digital data input from CPU (LC87F65C8A) when relevant key is operated. Active "H".
All manuals and user guides at all-guides.com ADJUSTMENT – 2 <TUNER> < TUNER SECTION > 7. FM VT Check 1. Clock Frequency Check Settings : • Test point : TP1 (VT) Settings : • Test point : TP2 (CLK) Method : Set to MW 1602kHz and check that the test Method : Set to FM 108.0MHz and check that the test...
All manuals and user guides at all-guides.com TAPE MECHANISM PARTS LIST 1 / 2 REF. NO. PART NO. KANRI DESCRIPTION 1 86-ZL1-203-010 TRAY,CAS 2 86-ZL1-204-010 LEVER,SLIDE L 3 86-ZL1-205-010 LEVER,SLIDE R 4 86-ZL1-202-010 FRAME,CAS 5 86-ZL1-209-010 LEVER,LOCK 6 86-ZL1-214-010 SPR-P,CAS 7 86-ZL1-211-010 ARM,CLAMP 8 86-ZL1-206-010...
All manuals and user guides at all-guides.com SPEAKER DISASSEMBLY INSTRUCTIONS Type.1 Type.4 Insert a flat-bladed screwdriver into the position indicated by the TOOLS arrows and remove the panel. Remove the screws of each speaker 1 Plastic head hammer unit and then remove the speaker units. 2 (() flat head screwdriver 3 Cut chisel How to Remove the PANEL, FR...
All manuals and user guides at all-guides.com ACCESSORIES / PACKAGE LIST REF. NO. PART NO. KANRI DESCRIPTION 1 8A-MTM-905-010 IB,K(E)M<K> 1 8A-MTM-906-010 IB,EZ(9L)M<EZ> 2 87-043-106-010 ANT,FM 1007AWG 3 87-A90-030-010 ANT,LOOP AM-NC C 4 8A-MTM-701-010 RC UNIT,RC-AAS01 – 57 –...
Page 58
All manuals and user guides at all-guides.com 2–11, IKENOHATA 1–CHOME, TAITO-KU, TOKYO 110, JAPAN TEL:03 (3827) 3111 9620450 0251431 Printed in Singapore...