Travel Charger - Blackberry 6710 Getting Started Manual

To remove the handheld from the cradle
To remove your handheld from the cradle, brace the bottom of the
cradle with one hand and gently pull the handheld up and out of
the cradle with the other hand.
Charging your handheld battery using the

travel charger

You can also use the travel charger to charge your handheld battery.
1. Verify that the battery is properly inserted into your handheld.
Refer to "To insert the battery" on page 41 for more information.
2. Insert the serial port connector at the end of the travel charger
cable into the serial port of your handheld.
Connecting the handheld to the travel charger
3. Slide the appropriate attachment piece into the back of the
travel charger. Refer to "To connect the attachment pieces to the
power adapter" on page 44 for more information.
4. Plug the travel charger into a power outlet.
5. Let the battery charge to full power before you use your
handheld. When your handheld battery is charging, the battery
power indicator (in the upper right corner of the handheld's
Home screen) changes to a charging indicator. When your
handheld is fully charged, the battery power indicator replaces
the charging indicator.
Getting Started Guide
Charging your handheld battery
47