Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Kurzweil KS-50A
- Page 2 CAUTION The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated RISK OF ELECTRIC SHOCK "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, The exclamation point within an equilateral triangle is intended...
- Page 4 Kurzweil International Contacts Contact the Kurzweil o ce listed below to locate your local Kurzweil representative. Customers outside the US: US Customers: Young Chang Co., LTD. American Music & Sound 925 Broadbeck Dr #220 178-55, Gajwa-Dong, Seo-Ku Kurzweil International Contacts...
-
Page 5: Table Of Contents
KURZWEIL KS-50A INDEX 1. Introduction ..........................6 2. Basics & Installation ........................6 Unpacking / Handling ..............................6 Connection ................................. 6 3. Placement ............................7 Stereo / 2.0 Positioning .............................. 7 Stereo with Subwoofer / 2.1 Positioning ........................7 5.1 Positioning ................................8 7.1 Positioning ................................ -
Page 6: Introduction
XLR balanced connection Connect the male side of a XLR balanced cable to the balanced XLR input of KS-50A. Make sure the power cable is connected as well. Setup all speakers (i.e. left / right channels) with the same type of cable. -
Page 7: Placement
Typically you would be using 2 units of KS-50A as one stereo pair or more in surround setups (i.e. in a 5.1 setup you would use 5 units of KS-50A together with a subwoofer). -
Page 8: Positioning
KURZWEIL KS-50A 5.1 Positioning In a 5.1 surround set, the center speaker should ideally be placed on top of the subwoofer. If this is not possible, the subwoofer can be moved to the left or right but should be as close as possible. The rear surround speakers should be positioned around 110°... -
Page 9: Orientation
KURZWEIL KS-50A Orientation -50A vertically. Never place them horizontally. Comments Please make sure to not place any obstacles that may block the flow of air or that could generate sound reflections (especially highly reflective material including glass or metal) in front of the monitor. -
Page 10: Rear Panel
KURZWEIL KS-50A Rear Panel 1. XLR input this connector accepts balanced XLR input connections (optimised for +4dBu). XLR input is wired like this: INPUT SIGNAL XLR CONNECTIONS PIN 2 PIN 3 Shield PIN 1 2. TS input this jack accepts TS input connections, unbalanced (optimised for -10dBV). The TS... -
Page 11: General Information
3. Vent Port KS-50A is a vented box speaker system with a vent port on the rear panel. Make sure you are not blocking the vent port (i.e. by putting the speaker too close to a wall) or the sound color will be changed.