Honeywell RTH7000 Series Operating Manual page 5

RTH7400/RTH7500
This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go. All you have to do is set
the time and day. Then check the settings below and change if needed:
1 Set clock ..................................................................................................See page 6
2 Select fan setting: Preset to Auto ......................................To change, see page 7
3 Select system setting: Preset to Heat................................To change, see page 8
4 Program schedules: Preset to energy-saving levels
while you're at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm)................................................To change, see pages 10-14
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 13-14).
3