Supported Paper - Epson SC-P9500 Series General Information Manual

SC-P9500 Series / SC-P7500 Series

Supported Paper

The following paper can be used with the printer. Print
quality is greatly affected by the type and quality of paper
used. Choose a paper suited to the task at hand. For
information on use, refer to the documentation
supplied with the paper or contact the manufacturer.
Before buying paper in large quantities, try printing on a
smaller sample first and check the results.
Roll paper
Roll core size 2 or 3 inches
Roll paper 2 inch roll core: less than 103 mm
outer diameter
3 inch roll core: less than 150 mm
Paper width SC-P9500 Series:
254 mm (10 inches) to 1,118 mm (44
inches)
SC-P7500 Series:
254 mm (10 inches) to 610 mm (24
inches)
Paper 0.08 mm to 0.5 mm
thickness
Cut sheets
Paper width SC-P9500 Series:
210 mm (A4) to 1,118 mm (44 inches)
SC-P7500 Series:
210 mm (A4) to 620mm
*2 SC-P9500 Series:
Paper length
279.4 mm to 1,580 mm (B0 series)
SC-P7500 Series:
279.4 mm to 914 mm (A1 series)
Paper 0.08 mm to 0.5 mm
thickness (0.5 mm to 1.5 mm for cardboard)
*1 The printing area is up to 610 mm (24 inches).
*2 Up to 762 mm for cardboard.
General Information
Supported Paper
*1
12