Advertisement
Installation
Before using Quha Vento there are a few things to do.
1. Select the settings (See Settings on page 6) to be used with
Vento.
2. Place a new AAA battery in the battery slot observing the
correct orientation.
3. Insert the flexible attachment loop into the battery slot cover
and close the battery slot cover by pushing it onto Vento.
4. Mount Vento to its attachment.
5. Connect the 3.5 mm connector plug (Figure 2: 4) to the device
to be controlled with the switch.
Replacing the Battery
1. Open the battery slot cover (Figure 3: 13) by carefully lifting
both of its edges.
2. Remove the old battery and place a new AAA battery in its
place observing the correct orientation.
3. Insert the flexible attachment loop into the battery slot cover
and close the battery slot cover by pushing it onto Vento.
5
Advertisement
