Turning On The Rx Path - Nokia 6265 Rf Description And Troubleshooting

6265/6265i/6268 (RM-66)
RF Description and Troubleshooting

Turning on the Rx Path

Use the following steps to turn on the Rx path using Phoenix.
1. On the Phone Control dialog box, click the LOCAL button in the Phone State
area to put the mobile terminal into Local Mode.
2. Click the Execute button.
3. Depending on the band, use the applicable settings from the table below on the
RF Main Mode dialog box.
Page 30
Figure 23: Phone Control dialog box
Table 5: RF Main Mode Dialog Box Settings
Band Mode
AMPS Rx = 881.52 MHz
Cell Rx = 881.52 MHz
PCS Rx = 1960 MHz
©2005 Nokia Corporation
Channel
384
384
600
Company Confidential Issue 1 11/2005