Selecting The Panel Id Code - Sony Bravia AZ3TK Chassis KDL-32BX359 Service Training Manual

7. Then press to view the Status Information screen.
8. The latest version is displayed as shown:
Main Micro
SW Version
NVM Version:
Boot Version:
Panel Version:
PQ Version:
AQ Version:
9. Do one of the following:
a. If the latest software is installed, proceed to Selecting
the Panel ID Code.
b. If the latest software is not installed, update the software
and then proceed to Selecting the Panel ID Code.
KDL-32BX359
SECTION 5 - UPDATES AND ADJUSTMENTS
SONY_2012_TOSCA_1.04
1.00
0.01
V0.004
V1.00b
AQ1.001

SELECTING THE PANEL ID CODE

CAUTION: You MUST SELECT THE CORRECT PANEL ID CODE for the
picture to display propertly.
Verify before proceeding to the next step:
; Verified Status Information
10. Press until Panel Selection is selected.
Sound Adjustment
Wide Band Tuning
Range Scan...
Self diagnosis history
Status Information...
LVDS Spectrum(%0)
Panel Selection
SERIAL NUMBER EDIT
MODEL NAME EDIT
11. Using the table below, press
Panel Code for the Panel ID.
Model Name Panel Code
KDL-32BX359 T315XW04_V3
CAUTION: If you do not select the correct Panel ID Code,
the picture may not display.
12. Verify the Panel ID Code is correct before proceeding to the
next step.
13. Proceed to Adding the Serial Number.
Service Mode
>>
>>
>>
>>
>>
<[ 50
<[ T315XW04_V3
[</>]Set [Menu] Exit
or to select the correct
Panel Type
SLCD LTY[Z]320AN04
]>
]>
Panel ID
25