D-Link DSL-G604T Quick Installation Manual page 11

Configuring the Router (continued)
Dynamic IP Address Connections
For this connection type, the user may choose Bridged IP LLC or Bridged IP VC-Mux. Both
of these connections require the user to have additional software located on their computer
to negotiate the connection with the ISP. Both Bridged modes will automatically set the
network connections. If you selected the Dynamic IP Address connection type, select the
Connection Type used for encapsulation and if you have been instructed to change the VPI
number and VCI number, type in the new values. Click Next when you are ready to continue
the Setup Completed menu.
If you have
been told by
your ISP,
change the
VPI or VCI
number,
Type the
new values.
The Cloned MAC Address
used to copy the MAC Address of
your Ethernet Adapter to the router.
Simply enter the
the space provided and click the
Clone Mac Address button.
field is
MAC Address into
Click the Next
to the Setup Completed menu.
11
Select the
Encapsulation
as 1483
Bridged IP
LLC or 1483
Bridged IP
VcMux as
instructed by
your ISP.
button to skip ahead