Connect A Pc To The Hub - NETGEAR EN308TC Installation Manual

All manuals and user guides at all-guides.com

3. Connect a PC to the Hub

Connect a PC to the Hub
You can connect PCs, Apple Macintosh computers, UNIX workstations, or any
device equipped with a 10BASE-T Ethernet interface to the RJ-45 ports on your
hub by using twisted pair Ethernet cables.
To connect any of the RJ-45 ports on your hub to a PC, use a regular straight-
through UTP cable. If you are connecting using port 8 on the Model EN308
hub, set the Normal/Uplink push button to Normal.
Note: Ethernet specifications limit the cable length between your PC
or server and the hub to 328 feet (100 meters) in length.
Model EN308
TC
Ethernet Hub Installation Guide
TC
9126FA