Stihl BF-KM Instruction Manual page 5

STIHL recommends the use of original
STIHL replacement parts, rotor blades
and accessories. They are specifically
designed to match the product and meet
your performance requirements.
The deflector on this power tool cannot
protect the operator from all objects
thrown by the blade (stones, glass, wire,
etc.). Ejected objects may also ricochet
and strike the operator.
Never attempt to modify your power tool
in any way since this may increase the
risk of personal injury. STIHL excludes
all liability for personal injury and
damage to property caused while using
unauthorized attachments.
Do not use a high-pressure washer to
clean the power tool. The solid jet of
water may damage parts of the unit.
Clothing and equipment
Wear proper protective clothing and
equipment.
Clothing must be sturdy
but allow complete free -
dom of movement. Wear
close-fitting clothes such
as a boiler suit, not a
loose jacket.
Do not wear clothing which could
become trapped in wood, brush or
moving parts of the machine. Do not
wear a scarf, necktie or jewelry. Tie up
and confine long hair above your
shoulders.
BF-KM
Wear safety boots with
steel toe caps and non-
slip soles.
WARNING
To reduce the risk of eye
injuries, wear close-fit -
ting safety glasses in
accordance with Euro -
pean Standard EN 166.
Make sure the safety
glasses are a snug fit.
Wear "personal" sound protection, e.g.
ear defenders.
Wear sturdy protective
gloves made of a resist -
ant material (e. g.
leather).
STIHL can supply a comprehensive
range of personal protective equipment.
Transporting the machine
Always stop the engine.
Carry the power tool hanging from the
shoulder strap or properly balanced by
the drive tube.
Do not touch hot parts of the machine -
risk of burn injury!
By vehicle: When transporting in a
vehicle, properly secure your machine to
prevent turnover, damage and fuel
spillage.
Before starting
Check that your power tool is properly
assembled and in good condition – refer
to appropriate chapters in the
KombiEngine and KombiTool user
manuals:
Rotor blades, correctly fitted, secure
–
and in perfect condition (clean,
moves freely, not warped)
Inspect the deflectors for damage
–
and wear. Do not operate the
machine with a damaged deflector –
replace damaged parts.
Do not attempt to modify the
–
controls or safety devices in any
way – only work with the deflector
fitted
Keep the handles dry and clean –
–
free from oil and dirt – this is
important for safe control of the
machine
Adjust carrying harness and
–
handles in accordance with body
height. Observe the chapter "Fitting
the Harness"
To reduce the risk of personal injury, do
not operate your power tool if it is
damaged or not properly assembled!
To prepare for emergencies when using
a harness: Practice setting down the
machine quickly. To avoid damage, do
not throw the machine to the ground
when practicing.
Holding and guiding the machine
Make sure you always have good
balance and secure footing.
English
3