Chapter 1: Introduction - MATSONIC MS9087C Manual

Table of Contents

Advertisement

Chapter 1
This mainboard has a Socket-478 supporting Intel
Pentium 4/Hyper Threading Technology processors with
Front-Side Bus (FSB) speeds up to 800 MHz. Hyper Threading
Technology, designed to take advantage of the multitasking
features in Windows XP, gives you the power to do more things at
once.
This mainboard integrates the Intel 865PE Northbridge along with
Intel 82801EB I/O Controller Hub (ICH5) chipsets that supports
the Serial ATA — a new interface for high-performance and
mainstream desktop PCs; the built-in USB 2.0 providing higher
bandwidth, implementing Universal Serial Bus Specification
Revision 2.0 and is compliant with UHCI 1.1 and EHCI 0.95.
This mainboard supports AC 97 Audio Codec and provides Ultra
DMA 33/66/100 functionIt has one 8x AGP, one CNR
(Communications and Networking Riser) and five 32 -bit PCI slots.
There is a full set of I/O ports including two PS/2 ports for mouse
and keyboard, one serial port, one parallel port and maximum eight
USB2.0 ports – four back-panel ports and onboard USB connectors
USB3/USB2 providing four extra ports by connecting the
Extended USB Module to the mainboard.
This mainboard is a Full ATX mainboard and has power
connectors for an ATX power supply.
Note: You must initiate the HT CPU function through
BIOS setup. It is strongly recommended you
refer to Page 31 for relative details.
Introduction

Advertisement

Table of Contents
loading

Table of Contents