Nokia N-Gage QD Manual

Nokia N-Gage™ QD Game Deck
Bluetooth settings
•
Bluetooth - On/Off
•
My device's visibility: Shown to all - your game deck can be found by other Bluetooth devices or Hidden - your game deck cannot be
found by other devices.
•
My device's name - Define a Bluetooth name for your game deck.
Icons for different Bluetooth devices:
Note: After you have set Bluetooth to be active and changed My device's visibility to Shown to all, your game deck and this name
can be seen by other Bluetooth device users.
Sending data via Bluetooth
There can be only one active Bluetooth connection at a time.
1. Open an application where the item you wish to send is stored. For example, to send an image to another compatible device, open the
Images application.
2. Select the item, for example, an image and select Options -> Send -> Via Bluetooth.
Tip! When searching for devices, some Bluetooth devices may show only the unique Bluetooth addresses (device addresses). To
find out what the unique Bluetooth address of your game deck is, enter the code *#2820# in standby mode.
3. The game deck starts to search for devices within range. Bluetooth enabled devices that are within range start to appear on the display one
by one. You can see a device icon, the device's Bluetooth name, the device type, or a short name.
Tip! If you have searched for Bluetooth devices earlier, a list of the devices that were found previously is shown first. To start a new
search, select More devices. If you switch off the game deck, the list is cleared.
o
To interrupt the search, press Stop. The device list freezes and you can start to form a connection to one of the devices already
found.
4. Scroll to the device you want to connect with and press Select.
5. Pairing (if not required by the other device, see step 6)
Nokia N-Gage™ QD
Computer Phone Other Unknown
1