Configuring Security - Siemens SIMATIC NET CP 1628 Operating Instructions Manual

Configuration

5.1 Configuring Security

5.1 Configuring Security
Security
Security settings are made either in "STEP 7 Professional (TIA Portal)" or, when using the
SIMATIC NET software product "S7 REDCONNECT", in the "SCT" software product (Security
Configuration Tool) that can be called up in STEP 7 as of V5.5.3. You will find further
information in the configuration manual "Industrial Ethernet Security – Basics and
Application". You will find this document on the Internet under the following entry ID:
109738463 (https://support.industry.siemens.com/cs/ww/en/view/109738463)
18
Operating Instructions, 06/2021, C79000-G8976-C280-09
CP 1628