3.
Double-click "nUpdate" to start the program.
When the program works correctly, "Searching for FW device..." will briefly be shown in the
Status column for a short time. Then, the Output Port column will display "FIRM."
・
If an error message appears, check the cable connection and system requirements, and start the
program again.
・
For details about the error messages, see page 6.
4.
Select the Update data to click the [Browse] button in the dialog.
The Update data is "N_FIRM_103.MID" which is in the same folder as "nUpdate."
・
If the update file is not correct, the Status column will display "File format error!!"
4