Basic Service Information; Electrical System - Yamaha MX360 Service Manual

Hide thumbs Also See for MX360:

Table of Contents

BASIC SERVICE INFORMATION

Checking the electrical system

TIP

Before checking the electrical system, make sure that the battery

voltage is at least 12 V.

NOTICE

Never insert the tester probes into the coupler terminal slots.

Always insert the probes from the opposite end a of the cou-

pler, taking care not to loosen or damage the leads.

Checking the connections

Check the leads, couplers, and connectors for stains, rust, mois-

ture, etc.

1. Disconnect:

9 Lead

9 Coupler

9 Connector

NOTICE

9 When disconnecting a coupler, release the coupler lock,

hold both sections of the coupler securely, and then dis-

connect the coupler.

9 There are many types of coupler locks;

therefore, be sure to check the type of coupler lock before

disconnecting the coupler.

NOTICE

When disconnecting a connector, do not pull the leads. Hold

both sections of the connector securely, and then disconnect

the connector.

1-3

GEN

INFO

Table of Contents