Husqvarna ST 224 Operator's Manual page 9

Nylon washer (1)
Spring (1)
Cable guide (1) (if equipped)
To install the handle
1. Raise the upper handle to the operating position.
2. Adjust the handle position to one of the mounting
holes (B) and tighten the handle knobs (C) with
the carriage bolts (D).
1481 - 004 - 14.04.2021
Carriage bolt 5/16-18 x 5/8 (1)
Shoulder bolt ¼-20 (1)
D
3. Install more carriage bolts (D) and handle knobs
(C) to secure the upper handle (A) to the lower
handle (E).
B
C
9