Charging The Shaver - Panasonic ES‑ST3N Operating Instructions Manual

Charging the shaver

• Turn the shaver off.
• Attach the carrying holder so as not to scratch the system
outer foil.
• Wipe off any water droplets on the appliance socket and the
charging stand.
1
1
Insert the appliance plug
[B] into the shaver.
2
2
Plug in the adaptor [B]
into a household outlet.
• Charging is completed after
approx. 1 hour.
The charging time may differ
with the charging capacity.
3
3
Disconnect the adaptor after charging is
completed.
• Charging the battery for more than 1 hour will not affect
battery performance.
Note
You cannot operate the shaver while charging.
While charging
status lamp (
2
• After charging is completed, turning the power switch ON with
the shaver plugged in will cause the charge status lamp (
to light up and then turn off after 5 seconds.
This shows that the shaver is fully charged.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charging time may
change or the charge status lamp (
1
minutes. It will eventually glow if kept connected.
• Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge or the battery may
fail to charge properly in extremely high or low temperatures.
The charge status lamp (
when there is a problem with charging.
Charge the shaver within the recommended ambient
temperature range.
• The shaver can be used for approximately 2 weeks with a full
charge. (Based on one 3‑minute dry‑shave use per day)
The number of usable days varies depending on the
following conditions.
‑ Beard thickness
‑ Pressure applied to the skin
‑ Ambient temperature
‑ Usage of wet shaving
After charging is
completed
The charge The charge
) status lamp (
glows red. turns off.
) will blink twice every second
Abnormal
charging
The charge
status lamp ( )
)
will blink twice
every second.
)
) may not glow for a few
13