Advertisement
Quick Links
LCTRT7135, LCTRT9543, LCTRT12047
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts & hardware
• Remove all wrapping materials, including any staples & packing straps
• Keep all hardware, small parts & packaging out of reach of children
PARTS:
A:TABLE TOP (x2)
B: STRINGER (x1)
C: LEGS (x2)
PG.1
Legacy Racetrack Conference Table
D: SUPPORTS (x2)
HARDWARE:
E: SCREWS (x32)
G: CORNER
BRACKETS (x4)
I: CAM LOCK
COVERS (x14)
FIGURE 1
To open Cam Lock, point arrow
:
toward Cam Pin Hole. To close and lock
Cam, turn clockwise
PROBLEMS OR QUESTIONS?
Call us at 866-816-9822 or email customerservice@regencyof.com
www.regencyof.com
F: CAM PINS (x14)
H: FLAT
BRACKETS (x2)
J: DPEL (x1)
Advertisement
Related Manuals for Regency Racetrack LCTRT7135
Summary of Contents for Regency Racetrack LCTRT7135
- Page 1 www.regencyof.com Legacy Racetrack Conference Table LCTRT7135, LCTRT9543, LCTRT12047 BEFORE YOU ASSEMBLE: • Place all parts on a clean, smooth surface to avoid scratching the parts • Check to be sure you have all parts & hardware • Remove all wrapping materials, including any staples & packing straps •...
- Page 2 www.regencyof.com Legacy Racetrack Conference Table LCTRT7135, LCTRT9543, LCTRT12047 STEP 1: Insert (3) Cam Pins (F) into each Leg (C). Two STEP 2: Attach Stringer (B) to Legs (C) by lining up Cam Pins (F) with Cam Locks on Stringer (B). Secure go on the inside, and one on the outside.
- Page 3 www.regencyof.com Legacy Racetrack Conference Table LCTRT7135, LCTRT9543, LCTRT12047 STEP 5A: Push both Table Tops (A) together, and STEP 6: Using two people, move the assembled base secure with Sash Locks—Rotate handle into the “ON” onto the Table Tops (A), lining up each Cam Pin (F) position until it locks into place.