Connecting Video Source Devices - BenQ MX710 User Manual

• Many notebooks do not turn on their external video ports when connected to a projector.
Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate
a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook.
Press FN and the labeled function key simultaneously. Refer to your notebook's
documentation to find your notebook's key combination.
• The D-Sub output only works when an appropriate D-Sub input is made to the COMPUTER
1 jack.
• If you wish to use this connection method when the projector is in standby mode, make
sure the Monitor Out function is turned on in the SYSTEM SETUP: Advanced menu. See
"Standby Settings" on page 58

Connecting video source devices

You need only connect the projector to a video source device using just one of the
connecting methods, however each provides a different level of video quality. The method
you choose will most likely depend upon the availability of matching terminals on both the
projector and the video source device as described below:
Terminal name
HDMI
Component Video
S-Video
Video
Connecting audio
The projector has two built-in mono speakers which are designed to provide basic audio
functionality accompanying data presentations for business purposes only. They are not
designed for, nor intended for stereo audio reproduction use as might be expected in home
theater or home cinema applications. Any stereo audio input (if provided), is mixed into a
common mono audio output through the projector speakers.
The built-in speaker will be muted when the AUDIO OUT jack is connected.
• In the unlikely event that you connect the projector to a DVD player via the projector's
HDMI input and the projected picture displays wrong colors, please change the color
space to YUV. See
• The projector is only capable of playing mixed mono audio, even if a stereo audio input is
connected. See
• If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the video source device is turned on and
operating correctly. Also check that the signal cables have been connected correctly.
for details.
Terminal appearance
"Changing Color Space" on page 26
"Connecting audio" on page 17
Picture quality
Best
Better
Good
Normal
for details.
for details.
Connection 17