BenQ FP92W User Manual page 10

4. Route the cables via the cable clip.
Release the cable retaining clip by squeezing the clip
inwards as illustrated. Position the cables together and
reinsert the clip over them to retain the cables neatly in
place behind the monitor stand.
5. Connect the power cable to a wall power outlet and
press Power on the monitor.
Plug the other end of the power cord into a power outlet
and turn it on.
Turn on the monitor by pressing the power button located
at the top of the row of buttons on the left edge of the
monitor.
Turn on the computer too, and follow the instructions in
Section 4:
Getting the most from your BenQ monitor
to install the monitor software.
on page 14
10 How to assemble your monitor hardware