GE LOGIQ E9 Service Manual page 433

GE H
EALTHCARE
D 5180263-100, R
IRECTION
8-6-4-1 Probe Holder Insert removal
Table 8-25
1. Carefully pull the flexible Probe Holder
Insert out of the lower UI frame. Large (1)
and small (2) soft, Probe Holder Inserts.
2. To remove the dongle, slightly lift up the end to disengage the Velcro, then pull the dongle out of
the USB port.
8-6-4-2 Probe Holder Insert installation
Table 8-26
1. Install the flexible Probe Holder Insert into
the lower UI frame. Be sure the hooks (1)
and tabs (2) fit properly and the Probe
Holder fits snugly.
5
EV
Probe Holder Insert removal
Steps
Probe Holder Insert installation
Steps
Chapter 8 Replacement procedures
LOGIQ E9 Service Manual
Corresponding Graphic
Probe Holder placement
Corresponding Graphic
Probe Holder placement
8 - 69