Adaptive Cruise Control Gap Settings; Following A Vehicle - Ford KUGA 2020 Owner's Manual

Adaptive Cruise Control
The indicator, current gap setting and set
speed appear in the information display.
Manually Changing the Set Speed
Press and release the toggle
button upward to increase the
set speed in small increments.
Press and hold the toggle button upward
to increase the set speed in large
increments. Release the button when you
reach the speed you prefer.
Press and release the toggle
button downward to decrease
the set speed in small
increments.
Press and hold the toggle button
downward to decrease the set speed in
large increments. Release the button when
you reach the speed you prefer.
You can also press the accelerator or brake
pedal until you reach the speed you prefer.
Press the toggle button upward or
downward to select the current speed as
the set speed.
The system may apply the brakes to slow
the vehicle to the new set speed. The set
speed continuously displays in the
information display when the system is
active.
SETTING THE ADAPTIVE
CRUISE CONTROL GAP
Press the button to cycle
through the four gap settings.
Kuga (CTD) Vehicles Built From: 28-09-2020, CG3851en enGBR, Edition date: 202008, First-Printing
(If Equipped)
E255686
The selected gap appears in the
instrument cluster display as shown by the
bars in the image.
Note: The gap setting is time dependent
and therefore, the distance adjusts with your
vehicle speed.
Note: It is your responsibility to select a gap
appropriate to the driving conditions.

Adaptive Cruise Control Gap Settings

Graphic Gap Distance
Display,
Bars Indic-
ated
Between
Vehicles
1
2
3
4
Each time you switch the system on, it
selects the last chosen gap setting.

Following a Vehicle

When a vehicle ahead of you enters the
same lane or a slower vehicle is ahead in
the same lane, the vehicle speed adjusts
to maintain the gap setting.
262
Dynamic
Behavior
Closest. Sport.
Close. Normal.
Medium. Normal.
Far. Comfort.