Sony WLA-NWB1 Operating Instructions Manual page 17

Symptom
Distorted sound
Sound break,
noise or playback
speed change
Pairing cannot be
established.
Bluetooth
connection cannot
be established
with a device that
has been "paired"
before.
Cause / Remedy
 Turn down the volume of the Bluetooth receiving
device to the point where the sound is no longer
distorted. For details on volume adjustment, refer
to the operating instructions supplied with the
Bluetooth receiving device.
 If a device that generates electromagnetic radiation,
such as a wireless LAN, other Bluetooth device(s),
or a microwave oven is nearby, move away from
such sources.
 Remove any obstacle between this unit and other
Bluetooth device or move away from the obstacle.
 Locate this unit and other Bluetooth device(s) as
near as possible.
 Re-position or re-orient this unit.
 Re-position or re-orient other Bluetooth device.
 Locate this unit and other Bluetooth device(s) as
near as possible.
 Check if you input correct passcode (page 8).
 This unit tries to connect with either of the last
two devices recognized before. If this unit cannot
establish the Bluetooth connection with a paired
device, operate the connecting procedures on the
Bluetooth receiving device or pair the device again.
 Pairing information may be deleted. Pair the device
again.
1
GB