IKEA MASTERLIG Manual page 10

ENGLISH
cable 4 x 2.5mm². Please respect specific
national regulations in the first priority.
• You must have the means for
disconnection incorporated in the fixed
wiring.
• You must have the connection and the
connecting links carried out as shown in
the connection diagram.
Connection diagram
Insert the shunts
Main power connection 1-phase
L
Wiring colours:
N
L
Tighten the terminal screws
securely!
Once you connect the hob to the mains,
check if all the cooking zones are ready to
use. Place a pot with some water on a
cooking zone and set the power setting for
220V-240V
220V-240V
between the screws as shown.
N
Yellow / green
Blue
Black or brown
• The earth lead is connected to terminal
and must be longer than leads carrying
electric current.
• Secure the connecting cable with cable
clips or clamps.
400V 2N
L1 L2 N PE
Main power connection 2-phase
Wiring colours:
N
L1
L2
each zone to the maximum level for a short
time.
If
the display after you switch on
the hob for the first time, refer to
"Troubleshooting".
220V-240V 1N
L N PE
220V-240V
L1 L2 L3 N
Yellow / green
Blue
Black
Brown
or symbol comes on
10