Remote Control; Replacing Remote Batteries - Danby DAC080B6IWDB-6 Owner's Manual

OPERATING INSTRUCTIONS

REMOTE CONTROL

1. ON/OFF: Press to turn the appliance on or off.
2. MODE: Press to set the desired mode.
3. ECO: Press to activate the ECO feature.
4. WIRELESS CONNECT: Press to activate the wireless
connection feature.
5. TEMPERATURE CONTROL BUTTONS: Press to
change the temperature setting.
6. SWING: Press to initiate the auto swing feature.
Press again when the louver reaches the desired
angle.
7. FAN: Press to set the desired fan speed.
8. TIMER ON: Press to activate the automatic on
timer.
9. TIMER OFF: Press to activate the automatic off
timer.
10. LED: Press to turn off the display on the appliance.
11. SLEEP: Press to activate the sleep feature.
12. C°/F°: Press to change the temperature scale being
displayed.

REPLACING REMOTE BATTERIES

1. Slide the back cover from the remote control
downward to expose the battery compartment.
2. Insert new batteries. Match the (+) and (-) on the
batteries to the markings on the compartment.
3. Slide the battery cover back into place.
Important Notes
• The remote control must be used within 8 meters of the appliance.
• The appliance will beep when a signal is received from the remote.
• Curtains and direct sunlight can interfere with the remote signal.
• Remove the batteries if the remote will not be used for more than 2 months.
• Do not mix old and new batteries or batteries of different types.
• Do not dispose of batteries as unsorted municipal waste. Refer to local laws for proper disposal of
batteries.
20