Belkin F5U103-MAC User Manual page 12

Belkin Printer Patcher
1. Double click the "Hard Drive" icon on your desktop.
2. Double click the "System Folder".
3. Double click the "Extensions" folder.
4. Look for the following files listed below then drag to
the "Trash":
a) Belkin USB Serial Driver
b) Belkin USB Serial Shim
c) Belkin USB Serial Hal
d) Serial Shim Lib
5. The Belkin USB Serial Adapter is removed. Restart
your computer.
Known Issues
Palm HotSync: The iMac ™ will pause for a minute during
HotSync. The manufacturer has identified this problem. An
updated driver is available for download at www.palmpilot.com.
Zoom Modem: Zoom Modem has newer modem scripts on
their web site. If the printer port emulation is enabled, Apple
Control will not list the adapter because Apple
Transport Networking does not support dial-up Internet
connections via the printer port. Note that modem cables used
with the adapter must support the DCD (carrier detect) signal
on its own pin.
Kodak DC-210: Transferring a FlashFix image using the Kodak
Picture transfer application can often lead to a message about
losing communication with the camera. The printer port
emulation must be used with the camera.
(continued)
® 's Open
8
® 's