Installing the USB Adapter
1. After unzipping the files onto your hard drive, the path you will have to specify
during installation will be C:\F5U104. If you chose to unzip the files onto a 3 ½
floppy disk, the installation path would be A:\
2. When you plug in the adapter, Windows will find a new device, (if Windows
does not find a new device, follow the uninstall instructions first).
3. Windows will ask, What do you want the wizard to do? Choose, Install from a
list or specific location (advanced). Click next.
4. Choose the option, Include this location in the search: and type the path
c:\F5U104 (or you can browse to the C: \ and locate the folder that you unzipped
the files to) and then click Next.
5. You will see a warning stating that the Belkin USB Direct Connect has not passed
Windows Logo testing, Continue Anyway.
6. Click on Finish to complete the first part of installation.
Installing the USB Network Adapter
7. Click on Start, then go up to My Computer and right click and from the menu left
click on Properties.
8. Click on the Hardware Tab and then Click on Add Hardware Wizard.
9. From the first menu just click on Next. After the wizard briefly searches, choose
Yes, I have already connected the hardware and click Next.
10. Scroll down the list and choose, Add a new hardware device and click Next.
11. Choose, Install the hardware that I manually select from a list (advanced).
12. Choose, Network Adapters and click on Next.
13. Choose, Have Disk and type the path c:\F5U104 (or you can browse to the C:\ and
locate the folder that you unzipped the files to) and then click OK.
14. Highlight, Belkin Direct Connect Network Adapter and click on Next and Next
again.
F5U104 Windows XP Installation