Advertisement
V O L U M E A D J U S T
From idle, or an alert display, pressing
▲ or ▼ will enter volume adjustment.
No Volume
20% Volume
60% Volume
80% Volume
▲ or ▼ will then adjust the volume of the Qr HUBB. Pressing
button toggles the vibration alerts On or Off, as indicated
by the Device Option LED. Press OK to confirm the change
in settings.
D E V I C E P A I R I N G
40% Volume
D E V I C E U N P A I R I N G
100% Volume
After deletion, the Qr HUBB will return to the channel select
mode, indicating the unpaired channel with a fast flashing
red indicator.
From idle, Press OK to enter channel
browsing mode. The last channel to
receive an alert will be selected by
default, and its corresponding channel
LED will pulse in the selected alert
colour. If the channel is unpaired, the
channel LED will fast blink red. From
the channel select mode, use ▲ and ▼
to select an unpaired channel, indicated
by a fast blinking red indicator. Press
and hold
to initiate pairing.Initiate the
pairing sequence on the other device.
On successful pairing, the Qr HUBB will
return to the channel select mode and
play a tone.
From the channel select mode, use
▲ and ▼ to select a paired channel,
indicated by a pulsing indicator LED.
Press and hold
to delete the pairing.
The indicator will blink red to indicate that
it is ready to delete this pairing. Press
OK to confirm, or wait for the mode to
time-out if you wish to cancel.
5
Advertisement
