Thermos GRILL2GO Advantage 07401407 Owner's Manual page 16

1) Attach (2) control knobs and (1) rotary ignitor knob by aligning holes with control panel as shown.
11
2) Remove (4) clear protectors from shelf supports.
Control Knob
Qty: 2
Rotary Ignitor Knob
Qty: 1
1) Open grill lid, unfold left non-locking side-shelf and griddle.
12
2) Unfold right locking side-shelf halfway and push towards hinge. Unfold completely and pull shelf outside to engage table
top grill handle.
3) Insert round end of vaporizer bar inside front hole of table top grill (See Fig C). Rest rear end of vaporizer bar over
support rib on backside of table top grill. (See Fig B).
4) Attach leg support to back of grill using (2) #10-24x1/2" screws and (2) #10-24 lock nuts. (See Fig. D)
5) Insert (2) cooking grates.
6) Insert Grease tray.
Note: To remove grease tray, rear lock tabs must be dis-engaged. (See Fig A)
Leg Support
#10-24 x1/2"
Screw
Qty: 2
#10-24 x 1/2"
Screw
#10-24
Rear Lock
Lock Nut
Qty: 2
Grease Tray
16
Clear
Protectors
Control Knob
#10-24
Nuts
Griddle
Left Side
Shelf
Lower Casting
Control Knob
Rotary Ignitor
Knob
Cooking Grate
Vaporizer Bar
Grease Tray
Control Knob
Rotary Ignitor
Knob
Right Side
Shelf
Front of Grill
Back Side
of Grill
Vaporizer Bar