Indesit DI620 Operating Instructions

Operating Instructions – Dishwasher Indesit DI620
Control Panel
Loading the dishwasher
• Place more difficult to clean items on the lower rack and lighter, more delicate items on the top rack.
Starting the appliance
• Press the ON-OFF button "A": indicator light "B" comes on. Your appliance is now on and awaiting instructions.
Select the wash cycle by pressing button "P". Each time this button is pressed, one of the indicator lights "C" will
•
come on in sequence, select the wash cycle you deem most suitable for the type of dishes to wash (see table
below). Close the appliance door and after a few seconds, you will hear a short beep: the wash cycle has begun
Cancelling or modifying a cycle while underway
• Premise: A cycle that is underway can only be modified if it has only been running for a short time.
Open the appliance door carefully to avoid any hot water splashes, then keep button "P" pressed for
•
approximately 5 seconds, until you hear 3 short beeps. Indicator light "C" will come off and at this point, all the
settings will have been cancelled. You are now free to re-set the correct wash cycle.
If you forget to load some of the dishes
• Interrupt the wash cycle by opening the appliance door with care, then insert the dish you had forgotten. When
you shut the appliance door, the cycle will start up from where you interrupted it. It will restart at the point
where it left off.