Stanley LLF0016A Instruction Manual

Asian Stanley International Co., Ltd.
●Installation of this product/ luminaire must be carried out by a qualified electrician in accordance with the national, local
electric and construction codes and regulations. Installation by unqualified person is prohibited by law.
Product Name
LLF0016A/LEN(1-4)/56/E/IN/A
LLF0016A/LEN(1-4)/72/E/IN/A
LLF0016A/LEN(1-4)/76/E/IN/A
LLF0016A/LEN(1-4)/80/E/IN/A
LLF0016A/LEN(1-4)/96/E/IN/A
Overall Dimensions
Maximum Projected area
IP classification
IK classification
Operation Temperature
Installation pole
Installation instructions
Attention at installation
WARNING
●Please ensure installation is in accordance with mounting instruction. Risk of product fall or fire.
●Do not use the product under the following environment and situation. It will cause electric shock and fire.
The unit will fall or not operate if not installed properly:
・Place exposed directly to organic solvent (Acetone, Ethyl ether, Hexane, etc.).
・Place where corrosive gas (Hydrogen sulfide, Chlorine, Ammonia, etc.)
and flammable gas (Hydrogen, Methane, etc.) is present.
・Places where flammable liquid (Gasoline, Kerosene, Fuel oil, etc.) is used.
・Places where humidity exceeds 90% or the product is affected by flood.
・Places covered by heat insulator and combustible material.
・Places where the product is buried under snow.
●Don't set it up in the place where the hazard is caused when the icicle drops. It causes the injury by the icicle fall.
●The insulation of the AC cable connected to the luminaire must be free from damage or cracks. -Risk of electric shock and fire.
●Do not disassemble this product, repair or replace any of its components. -Risk of electric shock, fire or the product fall.
●Do not use the product when broken or appears damaged in any way. -Risk of product fall, electric shock and fire.
●Please use the cable indicated on operation method with the performance beyond equality for a used cable.
It causes the electric shock, a fire, not lighting when other cables are used.
Instruction manual
Power
117W
150W
158W
167W
202W
Mount Height
Installer, please save a copy this instructions manual for retention and reference by the end user.
Incorrect handling of this product may cause serious personal injury, death and
damage to the product and property.
Road Light
Rated voltage Rated Current
100V 1.17A
240V 0.49A
100V 1.50A
240V 0.63A
100V 1.58A
100～240V
240V 0.66A
100V 1.67A
240V 0.70A
100V 2.02A
240V 0.84A
734mm × 313mm × 151mm
Φ60.5mm (Length ≧135mm)
Control No. D00191296A
For retention and reference
frequency Weight
50/60Hz ~10 kg
0.057 m
2
IP66
IK08
－20～50℃
6～14m
1/7