Behringer ULTRAGRAPH PRO FBQ1502 User Manual page 10

6V9DPÃDIQVUT
INPUTS
Impedance
Maximum
input level
CMRR
6V9DPÃPVUQVUT
OUTPUTS
SUBWOOFER OUT
Crossover frequency
T`TU@HÃ
TQ@8DAD86UDPIT
Frequency response
S/N ratio
Distortion (THD)
Crosstalk
SPGGPAAÃ
ADGU@ST@8UDPI
Type
Input
Low Cut
High Cut
BS6QCD8Ã@RV6GDa@S
Type
Frequency range
Bandwidth
Control range
GDHDU@SÃT@8UDPI
Attack/Release
Threshold
LED meter
IPDT@ÃB@I@S6UPS
Type
LED level meter
AVI8UDPIÃTXDU8C@T
FBQ
Audio In/Out
I/O Meter In/Out
Range
Low Cut
Limiter
Pink Noise
Subwoofer
DI9D86UPST
Input/output level
Subwoofer
VGUS6BS6QCÃQSPÃA7R%!
RF-filtered, servo-balanced XLR and 1/4" TRS connectors
balanced XLR connector,
level variable off to 0 dB
10 Hz to 30 kHz, +/-3 dB
variable (10 Hz to 400 Hz)
variable (2.5 kHz to 30 kHz)
analog 31-band equalizer
20 Hz to 20 kHz in 31 1/3-octave bands (ISO frequencies)
20 msec / 90 msec
variable, -6 dB to +22 dB (off)
Gain reduction 20/10/3/1 dB
Pink noise, level variable,
off to 0 dBu,
-24/-12/-6/0 dB
switches the meter display from input to output
shift of the maximum cut/boost range for all 31/15 bands
-
activates the limiter
activates the noise generator
activates the subwoofer output
8-segment LED display:
-24/-18/-12/-6/0/+6/+12 dB/CLIP
4-segment LED display:
-18/-12/0/+12 dB
VGUS6BS6QCÃQSPÃA7R" !
40 kΩ balanced and unbalanced
+21 dBu balanced and unbalanced
typ. 40 dB, >55 dB @ 1 kHz
servo-balanced XLR and 1/4" TRS connectors
variable, 30 - 200 Hz
22 Hz to 22 kHz >94 dB @ +4 dBu
typ. 0.006% @ +4 dBu, 1 kHz, Gain 1
typ. -65 dB @ 1kHz
12 dB/oct., Butterworth
variable (-15 dB to +15 dB)
1/3 octave
+/-6 dB or +/-12 dB (switchable)
activates the FBQ Feedback Detection System
switch to bypass the equalizer functions
-
-
-
-
12-segment LED display:
-30/-24/-18/-12/-6/
-3/0/+3/+6/+9/+12 dB/CLIP
-
VGUS6BS6QCÃQSPÃA7R $!
balanced XLR connector
10 Hz to 200 kHz +/-3dB
switchable, Cutoff @ 25 Hz
analog 15-band equalizer
20 Hz to 16 kHz in 15 bands
(ISO frequencies)
2/3 octave
-
-
-
-
-
activates the high pass filter
4-segment LED display:
-20/0/+6 dB/CLIP (output only)
-
-
-
-
-
-