Eco Settings; General Settings - Philips OLED706 Series User Manual

Custom Colour
Custom colour
 Settings > Ambilight > Custom colour.
To set the colour for Ambilight static light of your
choice. You can pick a colour you like from the colour
palette.
Advanced Ambilight Settings
Brightness
 Settings > Ambilight > Advanced > Brightness.
Press the arrows  (up) or  (down) to set the
level of Ambilight brightness.
Saturation
 Settings > Ambilight > Advanced > Saturation.
Press the arrows  (up) or  (down) to set the
level of Ambilight saturation.
Neutralise the influence of a coloured wall on the
Ambilight colours
 Settings > Ambilight > Advanced > Wall colour.
Select the colour of the wall behind the TV and the TV
will modify the Ambilight colours to appear as they
are intended.
Set Ambilight to switch off immediately or slowly
fade out when you switch off the TV
 Settings > Ambilight > Advanced > TV switch
off > Fade out to off / Immediate switch off.
 ISF Tuning
 Settings > Ambilight > Advanced >
tuning.
The ISF Calibration expert tunes and locks your
preferred colour for Ambilight. When the ISF
Calibration is done, select  Settings > Ambilight >
Ambilight style > Follow colour >  Warm white /
ISF to use ISF tuning for Ambilight.
14.4

Eco Settings

Set screen off to save energy consumption
 Settings > Eco settings > Screen off.
Select Screen off, the TV screen is switched off, to
switch the TV screen back on, press any key on the
remote control.
Switch on built-in ambient light sensor
 Settings > Eco settings > Light sensor.
Select Light sensor, the built-in ambient light sensor
lowers the brightness of the TV screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, to the lighting
conditions of the room.
Set TV switch off timer
 Settings > Eco settings > Switch off timer.
Press the arrows  (up) or  (down) to adjust the
value. The value 0 (Off) deactivates the automatic
switch off.
Select Switch off timer, the TV switches off
automatically to save energy.
* TV switches off if receiving a TV signal but you don't
press a key on the remote control during a 4 hour
period.
* TV switches off if not receiving a TV signal nor a
remote control command for 10 minutes.
* If you use the TV as a monitor or use a digital
receiver to watch TV (a Set-Top Box - STB) and you
do not use the remote control of the TV, you should
deactivate this automatic switch off, to set the value
to 0.
14.5
 ISF

General Settings

USB Hard Drive
You need to set up and format a USB Hard Drive
before you record a channel.
 Settings > General settings > USB Hard Drive.
Before you can pause or record a broadcast, or store
apps, you must connect and format a USB Hard
Drive. Formatting removes all files from the USB Hard
Drive.
Warning
The USB Hard Drive is formatted exclusively for this
52