Beko WTA 9612 XSW User Manual page 16

• In the stain groups stated above, find the
type of stain you want to remove and select
the quick auxiliary function selection key to
select the relevant group.
• Carefully read the tag of the clothing and
make sure that the temperature and spin
speed selected are suitable.
4.3.7 Special programmes
For specific applications, select any of the
following programmes.
• Aclarado (Rinse)
Use when you want to rinse or starch separately.
• Spin+Drain
Use this program to remove the water on the
clothe/in the machine.
Before selecting this programme, select the
desired spin speed and press Start/Pause
button. First, the machine will drain the water
inside of it. Then, it will spin the laundry at
the selected spin speed, and drain the water
coming off of the laundry.
If you only want to drain the water without
spinning the laundry, select the "Spin+Pump
programme, and use the Spin Speed
Adjustment button to select the No Spin
function. Press the Start/Pause button.
C
INFORMATION
• Use a lower spin speed for
delicate laundries.
4.3.8 Temperature selection
Whenever a new programme is selected, the
recommended temperature for the selected
programme appears on the temperature
indicator.
To decrease the temperature, press the
Temperature Adjustment button. Temperature
will decrease gradually. When the cold level is
selected, temperature level lights will not be on.
C
INFORMATION
• If the programme has not reached
the heating step, you can change
the temperature without switching
the machine to Pause mode.
16 / EN
4.3.9 Spin speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed
indicator.
To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed
decreases gradually. Then, depending on the
model of the product, "Rinse Hold" and "No
Spin" options appear on the display. When
the "No Spin" function is selected, rinse level
indicator lights will not be on.
Rinse hold
If you are not going to unload your clothes
immediately after the programme ends, you
can use rinse hold function to keep your
laundry in the final rinsing water in order to
prevent them from getting wrinkled when
there is no water in the machine. Press Start/
Pause button after this process if you want to
drain the water without spinning your laundry.
Programme will resume where it left off, drain
the water and then it will be complete.
If you want to spin the laundry held in water,
adjust the Spin Speed and press Start/Pause
button. Programme will resume. Water will
be drained, laundry will be spun and the
programme will end.
C
INFORMATION
• If the programme has not reached the spin
step, you can change the spin speed without
switching the machine to Pause mode.
4.3.10 Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. You can also select
or cancel auxiliary functions suitable for the
running programme without pressing the Start/
Pause button while the machine is operating.
To do this, the machine must be in a step
before the auxiliary function you are going to
select or cancel. If the auxiliary function cannot
be selected or canceled, light of the relevant
function will flash 3 times to warn the user.
Washing Machine / User Manual