Download Print this page

ADTRAN NetVanta ADSL Quick Start Manual

Adtran network interface quick start guide
Hide thumbs Also See for NetVanta ADSL:

Advertisement

Quick Links

®
NetVanta ADSL Network Interface Module (ADSL over ISDN) P/N 1200889E1/L1
Quick Start Guide
WAN-ADSL
S
PECIFICATIONS
ADSL Interface
ADSL over ISDN, Annex B
Supported Standards: ITU-T G.992.1 Annex B (G.dmt)
Connector: RJ-11C (6-pin jack, inner pair)
Dying Gasp (NetVanta 3200 only)
ATM
Multiple Protocol over AAL5 (RFC2684)
PPP over ATM (RFC2364)
PPP over Ethernet (RFC2516)
ATM Forum UNI 3.1/4.0 PVC
ATM Class of Service (UBR)
ATM F5 OAM
Up to 16 Virtual Circuits
Compliance
FCC Part 15 Class A, EN 55022 Class A, EN 55024,
EN 61000-3-2, EN 61000-3-3
AS/ACIF S043
EN 60950, IEC 60950, AS/NZS 60950
RoHS compliant, Telecommunications Exemption
(1200889E1 only)
Physical
Dimensions: 2.75-inch W x 4.25-inch D
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: Up to 95 percent, noncondensing
NetVanta modules should be installed only in NetVanta
Series products.
Quick Start Guide, 61200889E1-13D, July 2006
DBU
ADTRAN Technical Support +1-256-963-8716
For more detailed documentation, visit us online at www.adtran.com.
I
I
NSTALLATION
NSTRUCTIONS
1.
Remove power from the base unit.
2.
Slide the option module into the option slot until the module is
firmly seated against the chassis.
3.
Secure the pins at both edges of the module.
4.
Connect the cables to the associated device(s).
5.
Complete installation of the base unit.
6.
Restore power to the unit.
For NetVanta modules with outside plant
connections, ensure that all cables are
removed from the module before installing
or removing it from the NetVanta chassis.
WAN-ADSL (RJ-11C) P
Pin
Name
1, 2
3
R
4
T
5, 6
An optional Dial Backup Interface Module (DIM) is
required for dial backup applications.
For a description of the DBU pinouts, refer to the
Quick Start Guide included with your DIM
shipment.
Important: For additional details on product
features, specifications, installation, and safety, refer
to the appropriate Hardware Installation Guide on
the ADTRAN OS System Documentation CD
shipped with the base unit and available online at
www.adtran.com.
INOUTS
Description
Unused
Network - Ring
Network - Tip
Unused
Copyright © 2006 ADTRAN, All Rights Reserved

Advertisement

loading

Summary of Contents for ADTRAN NetVanta ADSL

  • Page 1 ® NetVanta ADSL Network Interface Module (ADSL over ISDN) P/N 1200889E1/L1 Quick Start Guide WAN-ADSL PECIFICATIONS ADSL Interface ADSL over ISDN, Annex B Supported Standards: ITU-T G.992.1 Annex B (G.dmt) Connector: RJ-11C (6-pin jack, inner pair) Dying Gasp (NetVanta 3200 only)
  • Page 2 ® NetVanta ADSL Network Interface Module (ADSL over ISDN) P/N 1200889E1/L1 Quick Start Guide ADSL NIM C OMMANDS retrain Forces the modem to retrain. snr-margin [showtime monitor l training monitor] <margin> Enables monitoring and sets the minimum signal-to-noise (SNR) ratio during training and showtime.

This manual is also suitable for:

Vsx-1018ah-kVsx-1018ah-s