Download Print this page
Behringer DR400 User Manual

Behringer DR400 User Manual

Digital reverb/delay

Advertisement

Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL
REVERB/DELAY DR400. This Reverb/Delay effects pedal delivers 24-bit high-resolution
stereo reverb and delay effects. Experience state-of-the-art sounds comparable to
studio processors in one compact pedal.
Select the effect mode via the MODE switch (see table below).
Depending on the selected mode, this knob adjusts the reverb time or the delay time.
In REVERB mode, this knob adjusts the reverbs' tonal character. In DELAY and
DLY+REV mode, this knob adjusts the amount of feedback (number of repetitions).
1 Short delay (32 - 128 ms)
2 Medium delay (128 - 500 ms)
3 Long delay (500 - 2000 ms)
4 Delay+small room (32 - 2000 ms)
5 Delay+big room (32 - 2000 ms)
6 Delay+concert hall (32 - 2000 ms)
7 Delay+reverb plate (32 - 2000 ms)
8 Simulates the reverb of a small room
9 Simulates the reverb of a big room
10 Simulates the reverb of a concert hall
11 Simulates the sound of a reverb plate
The BALANCE control determines the balance between the direct (dry instrument)
signal and the effect sound.
Use the ¼" TS IN connector to plug in the instrument cable.
The two ¼" TS connectors OUT A and OUT B send the signal to your amp or other
effects devices. Use both connectors if you want to achieve a full stereo effect.
For mono use, just plug in OUT A.
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the foot switch to activate/deactivate the effect. When pressing the foot
switch 2 seconds or longer, you can tap in the delay time (ON/BATT LED flashes).
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove
the pedal cover. Be careful not to scratch the unit.
DIGITAL REVERB/DELAY DR400

1. CONTROLS

Effect description
Top view
Delay time
Delay time
Delay time
Delay time
Delay time
Delay time
Delay time
Reverb time Tone
Reverb time Tone
Reverb time Tone
Reverb time Tone
Feedback
Feedback
Feedback
Feedback
Feedback
Feedback
Feedback
-

Advertisement

loading

Summary of Contents for Behringer DR400

  • Page 1: Controls

    DIGITAL REVERB/DELAY DR400 Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL REVERB/DELAY DR400. This Reverb/Delay effects pedal delivers 24-bit high-resolution stereo reverb and delay effects. Experience state-of-the-art sounds comparable to studio processors in one compact pedal.
  • Page 2: Specifications

    Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein.