Application Examples; Using A Mixing Console; Using Several B312A/B315A Loudspeakers; Direct Connection Of A Stereo Signal Source - Behringer Eurolive B315A User Manual

Behringer eurolive b315a: user guide
Hide thumbs Also See for Eurolive B315A:
Table of Contents

Advertisement

EUROLIVE B312A/B315A
Fig. 2.2: Control elements and connections
(B312A and B315A)
{9} You can replace fuses at the FUSE SWITCH of the
B312A/B315A. Always replace fuses with the same type.
Please follow the instructions given in chapter 5
"Specifications."
(10) The mains connection is established using a cable with an IEC
mains connector. This cable is delivered with the
B312A/B315A. To avoid ground-loop hum, loudspeakers and
mixing consoles should be connected to the same power
circuit.
(11) Press POWER to turn on your B312A/B315A.
Attention: The POWER switch does not fully
disconnect the unit from the mains. To disconnect
the unit from the mains, pull out the main cable plug
or appliance coupler. When installing the product,
ensure the plug or appliance coupler is readily
operable. Unplug the power cord completely when
the unit is not used for prolonged periods of time.
(12) SERIAL NUMBER
6

3. Application examples

Turn the LEVEL control fully to the left before you
switch on the unit with the POWER switch. Then,
raise the volume to a suitable level.

3.1 Using a mixing console

A common way to use 2 B312A/B315A loudspeakers is with a
mixing console. In this case, connect each of the main outputs
that are on the mixing console to a B312A/B315A loudspeaker.
The B312A/B315A includes XLR and 1/4" connectors. To avoid
interference, use only XLR or 1/4" jack cables.

3.2 Using several B312A/B315A loudspeakers

INPUT
LINK OUTPUT
INPUT
Fig. 3.1: Wiring several B312A/B315A loudspeakers using
For larger rooms, you can connect several B312A/B315A
speakers using the LINK OUTPUT connector (see fig. 3.1).

3.3 Direct connection of a stereo signal source

When you use two B312A/B315A loudspeakers, you can directly
connect one stereo signal source, for example, a CD player. In
this case, each of the speakers is connected to 1 signal-source
output. (If necessary, use the appropriate adaptor.)
3. Application examples
EUROLIVE B315A
INPUT
LINK OUTPUT
INPUT
Output Left
Output Right
XENYX 2442FX
the LINK OUTPUT connector

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eurolive b312a

Table of Contents