Wiring The Vt100Fxh; Installation - Behringer Virtube VT100FX User Manual

VIRTUBE VT100FXH/VT100FX/VT250FX/VT50FX
3.4

Wiring the VT100FXH

The VT100FXH has two SPEAKER OUT outputs for connection
of one or two external speaker cabinets. To achieve maximum
power output on the VT100FXH, both speaker outputs should
be connected to speaker cabinets with a minimum impedance of
4 Ω. Connecting headphones to the PHONES jack will automati-
cally mute the speaker outputs.
Fig. 3.4: VT100FXH with two speaker boxes
4.

Installation

Except for the headphones output and the CD IN input (1/4" TRS
connectors), all audio inputs and outputs on the BEHRINGER
VIRTUBE are on 1/4" TS connectors. Please see Chapter 5,
"Specifications" for more information.
Please ensure that the unit is installed and operated
+
only by people qualified to do so. During installation
and operation the user must have sufficient electrical
contact to earth. Electrostatic discharge may affect the
operation of the unit.
8
Fig. 4.1:
Fig. 4.2: 1/4" TRS connector
Fig. 4.3: Stereo adapter cable
Fig. 4.4: Mono adapter cable
Installation
1/4" TS connector