Sennheiser MKE 400 Instructions For Use Manual page 5

Switch the microphone on by setting the " on/ off" swit ch
two posit ions:
" on/ off" Set t ing
switched on
(linear frequency response)
on off
switched on
(low-cut filter is activated for minimizing wind noise)
on off
On switch-on, the " batt" LED
is operational.
Not e: When you have finished using the microphone, it is
vital that you switch it off by set ting the " on/ off"
¿
switch
Adjust the microphone senstivity to the volume of the sound source and
to the input sensitivity of the camera/ camcorder by setting t he " vol"
·
switch to the correct position:
" vol" Set t ing
Normal sensitvit y:
for normal or very loud sound sources and cameras/
–
+
vol
camcorders with high input sensitivity
High sensitvity:
for extremely quiet or very distant sound sources and
–
+
vol
cameras/ camcorders with low input sensitivity
»
flashes briefly, indicating t hat the batt ery
to the " off" posit ion!
¿
to one of t he
on off
3