Connections - Loewe bild 3 Operating Manual


Loewe bild 3
Operating manual 2

Connections

Position and function of the connections (bild 3.55 oled)
K
1
1
Slot for Kensington lock
2
Mains switch
3
AC IN - Mains connection
Mains socket – 220-240 V ~ 50 / 60 Hz
4
LAN - Network connection
RJ-45 – Ethernet / Fast Ethernet
5
ANT SAT 1 - Satellite antenna (Sat tuner 1) DVB-S/S2
F socket – 75 Ohm / 13/18 V / 500mA
6
ANT SAT 2 - Satellite antenna (Sat tuner 2) DVB-S/S2
F socket – 75 Ohm / 13/18 V / 500mA
7
ANT TV - Antenna/cable analogue / DVB-T/T2 / DVB-C
IEC socket – 75 Ohm / 5 V / 80mA
8
HDMI 1 - HDMI input 1
HDMI – Digital Video IN/Audio IN/OUT
9
HDMI 2 - HDMI input 2
HDMI – Digital Video IN/Audio IN
10
USB 3.0 - USB connection
USB type A – USB 3.0 (max. 2A
(1 Before connecting an external device, please be aware that the individual HDMI ports
can work with a range of different signals, see online User handbook, chapter Technical
data, section bild (across sets) – Signals via HDMI/AV (PC IN).
(2 The adaptor is available as an accessory from your dealer.
37192001_OM2_bild_3_43-55_2_00_ML_Buch.indb 15 37192001_OM2_bild_3_43-55_2_00_ML_Buch.indb 15
2 3
(1 (with Audio Return Channel)
(1
(5 )
4 5 6
7 8
11
AUDIO OUT/TOSLINK - Audio output (analogue/digital)
Jack 3,5 mm (analogue) L/R
Mini Toslink (digital)
12
HEADPHONE - Headphone connection
Jack 3,5 mm – Headphones 32–200 Ohm
13
RS-232C - Serial interface
14
AV - Center IN (4
Micro AV socket
15
HDMI 3 - HDMI input 3
HDMI – Digital Video IN/Audio IN
16
COMMON INTERFACE - CI slot 1 (standard V1.4)
17
COMMON INTERFACE - CI slot 2 (standard V1.4)
18
HDMI 4 - HDMI input 4
HDMI – Digital Video IN/Audio IN
19
USB 2.0 - USB connection
USB type A – USB 2.0 (max. 2A
20
USB 3.0 - USB connection
USB type A – USB 3.0 (max. 2A)
(3 The analogue or digital output signal at the AUDIO OUT connector cannot be used
simultaneously.
(4 Can be used with the Loewe klang link mc and its enclosed adapter. Loewe klang link
mc will be available at a later point in time.
(5
The maximum current of 2A is only accessible if one USB port is used. If both USB ports
are in use, the maximum current is divided between them.
9 10
(2 – (RJ12)
(1
(1
(5 )
20
19
18
17
16
15
14
13
12
11
(3
15
20.05.2019 11:32:08 20.05.2019 11:32:08