Removal steps of the base cover assembly
Applying labels to the base cover assembly
The following illustration and table show the label areas and what labels are applied in each area.
1
GEO label
3
Country label
1030 Built-in battery
For access, remove these FRUs in order:
• "1010 Lenovo Garaged USI pen (for selected models)" on page 42
• "1020 Base cover assembly" on page 42
Important notices for replacing a built-in battery
Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and
provides no warranties for failures or damage arising out of their use.
A battery FRU should not be replaced unless this diagnostic test shows that the battery is defective. The only
exception to this is if the battery is physically damaged or a customer is reporting a possible safety issue.
2
Asset tag label
4
Serial number label
Chapter 7
.
FRU replacement notices
43