Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for NA Mozart ONE
- Page 1 Operation Manual Mozart ONE...
-
Page 2: Unpacking Instructions
Avoid direct eye exposure to the light source while it is on. Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact: „Company NA” at: +37167801110. - Page 3 Description Mozart One is one of the Mozart LED family fixtures controlled via DMX512 protocol, using RDM- DMX512 protocol enhancement which allows bi-directional communication between a lighting or system controller and attached RDM compliant devices over a standard DMX line. Due to its size and appearance, it is great to be used as a part of scenery.
-
Page 4: Specifications
Specifications Mozart ONE LED Light sources 6 CREE XM-L LEDs (beneath single lens) Pixels per fixture DMX Channels per fixture 1, 3, 4 Color LED’s RGBW Color Mode WHITE, RGB, RGBW Refresh rate 1200 HZ Intensity Control 8bit Control Mozart PSU... - Page 5 Setup A DMX data link is needed to run light shows of one or more fixtures using a DMX-512 lighting console. The combined number of channels required by all of the fixtures on the DMX data link will determine the number of fixtures the DMX data link can support.
- Page 6 Fixture linking DMX 512 Controller RDM Mozart PSU Mozart PSU Continue linking Amphenol Amphenol Up to 10 Up to 5 Mozart ONE fixtures Mozart ONE fixtures in High Power Mode...
-
Page 7: Pixel Map
RDM. To set fixture ID Nr. for Mozart ONE , at first you have to set DMX address for the Mozart PSU. For instance: DMX address for the Mozart PSU is set to the DMX channel 0-255. - Page 8 The current internal fixture ID will appear (1-8). To change this number: press <Set Address> button. The next addressing number will appear. Repeat until the desired fixture number is shown on the tile Note! Pressing the button once and not holding it will make the temperature information to occur. The information will show by steps on the 7-segment display.
- Page 9 Using a starting address of DMX 1 on the 10-way PSU, this chart is an example of the Mozart fixture ID FIXTURE ID FIXTURE ID FIXTURE ID DMX CH DMX CH DMX CH 1 PIX 1 PIX 1 PIX …continue as necessary...
- Page 10 Return Merchandise Authorization Number (RMA #). Products returned without an RMA # will be refused. Call Company NA and request RMA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the customer’s responsibility.
- Page 11 Note: If you are given an RMA #, please include the following information on a piece of paper inside the box: 1) Your name 2) Your address 3) Your phone number 4) The RMA # 5) A brief description of the symptoms LAIMS Damage incurred in shipping is the responsibility of the shipper;...