Specification - tatsuno ULTRA Instruction And Maintenance Manual

UP050-EN Nozzle FN-1024 - Instruction and Maintenance Manual_rev2.docx

1. Specification

The TATSUNO ULTRA automatic nozzle must be set up with TATSUNO single swivel (FJ-1006) or double
swivel (FJ-1045) when connecting to the fuel dispenser hose.
Single Swivel (FJ-1006)
The TATSUNO ULTRA automatic nozzle & swivels are designed for use on fuel dispensers up to 45L/min
flow rate.
The TATSUNO ULTRA automatic nozzle & swivels fulfil European Standard EN 13012 and EN 13617-4, and
each nozzle & swivel has been subjected to stringent tests before leaving the factory.
Model
Fuel type used
Spout O.D.
Flow range
Maximum working pressure
Temperature range
Viscosity range
Pressure-controlled safety shut-off
mechanism for prepay/pre-set dispensers
Hose Inlet
Specification
Nozzle: FN-1024; Swivels: FJ-1006 & FJ-1045
Petrol, Kerosene, Light oil (Diesel oil)
21mm, 25mm
2L/min up to 45L/min
0.49MPa
-20℃ up to +50℃
0.3mPa.s up to 6mPa.s
Applicable
G 3/4" female or G 1" male (with single swivel FJ-1006)
- 1 -
Double Swivel (FJ-1045)