Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
This appliance must be correctly installed by a suitable qualified
person strictly in accordance with the manufacturer's instructions.
The manufacturer's declines any responsibility for injury or damage
to persons or property as a result of improper installation of this appliance.
The housing, adjacent furniture and all materials used in installation
must be able to withstand a minimum temperature of 85°C plus ambient
during periods of operation. In addition, adjacent furniture cabinet
doors must be at least 4 mm from the appliance at all points. Certain
types of vinyl or laminate kitchen furniture cabinetry are particularly
prone to heat damage and discoloration. Any delamination or disco-
louration of materials which occurs below 85°C plus ambient or where
materials are less than 4 mm from the appliance will be the liability
of the owner.
This appliance is designed for building-in to a standard 600 mm wide
oven housing.
The housing into which the appliance is installed must incorporate a full
depth shell positioned 50 mm below the support shelf for the appliance.
For building-in to a tall housing, the installation dimensions are as
follows on the next page.
Important:
When placing the oven in the housing, do not use the oven door as a lever
for lifting the oven as damage may result.
Lift the oven using the purpose designed metal handles on the sides and
slide it into the housing unit.
Align the oven centrally in the housing unit before securing it.
On ce the oven has been positioned in the housing it should be secured
in place at the four corners of the oven door frame using suitable screws.
8
Hide quick links:
Advertisement
Table of Contents
