Optimus MX-88 Installation And Operating Instructions Manual page 29

7. REMOTE WALL PANEL CONTROL WP-8A
(1) MIC INPUT JACK
An input jack to connect a Condenser MIC. It is recommended to use a balanced MIC.
(2) LINE INPUT JACK
Line input terminal.
(3) MIC INPUT VOLUME
Adjusts MIC input volume.
(4) LINE INPUT VOLUME
Adjusts Line input volume.
(5) BGM SELECT SWITCH
It permits to select which of the BGM inputs will be broadcasted by the associated output
zone.
(6) ZONE VOLUME POTENTIOMETER
It permits to adjust BGM output volume of the associated output zone.
(7) ACTIVE SWITCH
This switch permits to select whether the audio of the wall panel is broadcasted to the
MX-88. If it activated an "L" is displayed in the associated output zone.
MX-88 Version 1.0
MX-88
AUDIO MATRIX 8x8
Page 10 of 18