Samsung Galaxy Note 8.0 Repair Manual

Hide thumbs Also See for Galaxy Note 8.0:

User manual (206 pages)

Basics of using (20 pages)

Manual del usuario (200 pages)

Table Of Contents

Table of Contents

Quick Links

HW Repair Guide

GT-N5100 (Galaxy Note 8.0)

March, 2013

Confidential

Table of Contents

Summary of Contents for Samsung Galaxy Note 8.0

Page 2 Samsung reserves the right to make changes to this docume nt and the product described herein, at anytime, without obligation on Samsung to provid e notification of such change.
Page 3 Contents Introduction of GALAXY Note 8 Service Guide RF calibration • IMEI writing • Block Diagram • Repair Guide Assembly & Disassembly • Electronic Components • SMD parts • Trouble Shooting • Q&A © Samsung Electronics Co., LTD | Confidential...
Page 4 Introduction of GALAXY Note 8.0 Specification This model is the portable media Tablet device and it has 8 inches size. So, it expected to replace the diary and it has S-pen, S-planner, S-Note, etc. Item spec. 1.6GHz Quad Core(Exynos 4412) Android JB XMM6262(IMC), HSPA+ 21.1Mbps, HSUPA 5.76Mbps...
Page 5 System. (Daseul Launcher, Runtime and Model File) Run Calibration program Check the CAL Check and select correct file Check the Calibration and select correct file Click the Extract Click the Start button & Run button © Samsung Electronics Co., LTD | Confidential...
Page 6 Type the correct H/W version Click the Model Information Check the Calibration Click the Hardware Config Check the System Config items Click the OK button Check the connection port of Phone, MSTS and Power Supply © Samsung Electronics Co., LTD | Confidential...
Page 7 RF calibration(3/3) The Result bar is changed to the GREEN color if the calibration is Passed. Click the Start button and connect the phone to Anyway Jig. © Samsung Electronics Co., LTD | Confidential...
Page 8 System. (Daseul Launcher, Runtime and Model File) Run Daseul program for IMEI writing. Check and select correct file Check the IMEI Check the IMEI and select correct file Click the Extract Click the Start button & Run button © Samsung Electronics Co., LTD | Confidential...
Page 9 IMEI Writing (2/3) Click the Hardware Config Check the IMEI Write and IMEI Check Check the System Config items Check the Check the connection port of OK button Phone and Power Supply © Samsung Electronics Co., LTD | Confidential...
Page 10 Click the Start button and connect the phone to Anyway Jig. Type the correct The Status bar is changed to IMEI number GREEN color if IMEI writing is Passed Click the Model Info © Samsung Electronics Co., LTD | Confidential...
Page 18 GH59-12919A GH59-12906A GH59-12911A 11pin sub PCB (including SPK(R) connector and Home key FPCB connector GH59-12908A GH59-12910A SPK(R)/ GH59-13128A Main MIC Home SIM card Module key FPCB socket S-Pen GH59-13117A GH98-25480A SPK(L) Module GH59-12907A © Samsung Electronics Co., LTD | Confidential...
Page 19 IrDA IC OSC200 2805-001098 Oscillator – 26MHz UME600 1107-002190 MoviNAND U201 1205-004649 GPS IC (inside of shield-can) UCD400 1205-004510 Audio CODEC HDC900 3708-002222 Connector (5M Camera) U702 1203-006346 Reset IC U701 1203-007657 PMIC © Samsung Electronics Co., LTD | Confidential...
Page 20 Application Processor UME300 1105-002212 Mobile DDR SDRAM BTC700 3711-008421 Connector (Battery) UCP300 1205-004511 Call Processor HDC300 3711-008347 Connector (SIM) U705 1203-007321 IF PMIC IFC500 3711-006843 Connector (11pin sub PCB) HDC400 3711-008347 Connector (SPK-L) © Samsung Electronics Co., LTD | Confidential...
Page 21 Check the voltage of the following chips AP_PS_HOLD(TP) > 1.8V (C755, C754, C727, C736, AP_PS_HOLD(TP)) If not the correct value PMIC (U701) 32KHz Main chip (UCP600) Check the frequency of OSC700(C705) If not the correct value TCXO (OSC700) © Samsung Electronics Co., LTD | Confidential...
Page 22 Power problem Step2 Step3 batt Check the power-key FPCB Step5 Step6 C705 OSC700 AP_PS_HOLD(TP) U701 C754 C755 C727 C736 © Samsung Electronics Co., LTD | Confidential...
Page 23 C763 = 5V Go to the next step Check the voltage of V_BUS(C763). Connection status of If not the correct value TA or USB. Abnormal Charging IC(U705) Check the charging operating of battery. Normal © Samsung Electronics Co., LTD | Confidential...
Page 25 RF components. of RF components. (compared with a good PBA) F100(Antenna Switch Module) F101(SAW Duplexer) PAM100(Power Amplifier Module) Normal status CP(Call Processor) ANT100, ANT101(Antenna contact clip) (compared with a good PBA) (UCP300) U100(Transceiver) OSC100(DCXO) © Samsung Electronics Co., LTD | Confidential...
Page 26 RF(GSM/WCDMA) Step2 Step3 Main Antenna Check the main antenna and Flight mode has antenna clip to uncheck. Compare with normal samples. Step4 OSC100 DCXO – 26MHz U100 Transceiver F101 SAW Duplexer F100 PAM100 © Samsung Electronics Co., LTD | Confidential...
Page 27 If not the correct value SIM Card phone is started Check the voltage of SIM R331 = 3V (R331) Notice. It should be measured when the If not the correct value CP(UCP300) phone started © Samsung Electronics Co., LTD | Confidential...
Page 28 SIM card detection problem Step2, 3, 4 R330 R331 HDC300 SIM socket connector SIM socket © Samsung Electronics Co., LTD | Confidential...
Page 29 Same signal compared with a Check the signal of C418, C419 Microphone good PBA Notice. It should be measured when the If not the correct value AUDIO CODEC(UCD400) microphone path is activated on © Samsung Electronics Co., LTD | Confidential...
Page 30 Microphone Problem Step2, 3 Step4 Check the MIC Check the MIC hole and rubber FPCB status Step6 Step5 C418 UCD400 U401 Audio CODEC C419 C413 © Samsung Electronics Co., LTD | Confidential...
Page 31 L406, L407 of Left Speaker in main PCB, good PBA C105, C106 of Right Speaker in Sub PCB. If not the correct value Audio Codec (UCD400) Notice. It should be measured when the speaker path is activated on © Samsung Electronics Co., LTD | Confidential...
Page 32 Speaker Problem Step3 Check the SPK connector Check the SPK connector Left Speaker Right Speaker + Main MIC Step5 C105 C106 L406 L407 © Samsung Electronics Co., LTD | Confidential...
Page 33 Check the clock of C250, C251 (Same signal compared BT/WIFI IC (U203) with a good PBA) Notice. It should be measured when the BT/WIFI path is activated on If not the correct value OSC201 © Samsung Electronics Co., LTD | Confidential...
Page 34 BT/WIFI Problem Step1 You can check the this layout if open the shied cover Check the turn on Step2, 3, 4 ANT202, ANT203 Step2 U203 BT/WIFI IC BT/WIFI Antenna C251 OSC201 C250 C233 © Samsung Electronics Co., LTD | Confidential...
Page 35 GPS IC(U201) Check the clock of C200,C201(OSC200) (Same signal compared GPS LNA(U200) with a good PBA) Notice. It should be measured when the GPS path is activated on If not the correct value OSC200 © Samsung Electronics Co., LTD | Confidential...
Page 36 GPS/GLONASS Problem Step1 Check the turn on Step3, 4 Step2 L200 C209 C211 U200 ANT202, ANT203 U201 GPS IC OSC200 BT/WIFI Antenna C200 C201 © Samsung Electronics Co., LTD | Confidential...
Page 37 Check the voltage of C800 and C801 Notice. It should be measured when the display is Normal(C800 = V_BATT, Go to the next step activated on C801 = 3.3V) Solved Replace the LCD Not solved Main Chip or PBA © Samsung Electronics Co., LTD | Confidential...
Page 38 Display Problem Step2, 3, 4 U800 C801 C800 C806 Step2 HDC800 LCD Connector U802 C804 LCD connector FPCB © Samsung Electronics Co., LTD | Confidential...
Page 39 Notice. It should be measured when the Same signal compared with a Go to the next step display is activated on good PBA Solved Replace the TSP Not solved Main chip or PBA © Samsung Electronics Co., LTD | Confidential...
Page 40 Touch Problem Step2, 3, 4, 5 U904 C903 C902 Touch Sensor IC C913 R682 U902 ZD903 R683 ZD904 ZD905 R908 Step2 SLC900 TSP Connector LCD connector FPCB © Samsung Electronics Co., LTD | Confidential...
Page 41 Notice. It should be measured when the Same signal compared with a Go to the next step display is activated on good PBA Solved Front Ass’y Replace the Front Ass’y Not solved Main chip or PBA © Samsung Electronics Co., LTD | Confidential...
Page 42 S-Pen Problem Step2 S-Pen connector FPCB Step2, 3, 4, 5, 6 U1008 SLC1000 S-Pen IC S-Pen Connector R1042 C1045 C1052 C1046 R1041 C1036 C1037 OSC1001 C1035 U1005 R1031 R1032 U1007 U1006 © Samsung Electronics Co., LTD | Confidential...
Page 43 F900, F901 Notice. It should be measured when the 5M Normal Go to the next step CAM is activated on Solved 5M CAM Replace the 5M CAM Not solved Main chip or PBA © Samsung Electronics Co., LTD | Confidential...
Page 44 5M CAM Problem Step5 Step2, 3, 4, 5, 6 R678 R679 F901 C920 F900 C917 R906 C921 Step7 5M CAM Module C922 TP_CAM_I900 TP_CAM_I901 HDC900 5M CAM connector © Samsung Electronics Co., LTD | Confidential...
Page 45 Abnormal F902 Notice. It should be measured when the Normal Go to the next step 1.3M CAM is activated on Solved 1.3M CAM Replace the 1.3M CAM Not solved Main chip or PBA © Samsung Electronics Co., LTD | Confidential...
Page 46 1.3M CAM Problem Step4 R907 Step2, 3, 6 HDC901 1.3M CAM connector Step5 C925 F902 C927 C926 TP_CAM_I900 TP_CAM_I901 Step5 Step7 1.3M CAM Module R678 R679 © Samsung Electronics Co., LTD | Confidential...
Page 47 C506 = 5V Go to the next step Check the voltage of V_BUS_IN(C506) Charge protection If not the correct value (U504) Solved Sub PCB Replace the Sub PCB Not solved Main chip or PBA © Samsung Electronics Co., LTD | Confidential...
Page 49 L1001 = 1.2V, C1010 = 1.8V Check the voltage of following chips (L1000, C1006, L1001, C1010) MHL LDO If not the correct value (U1003, U1004) Solved MHL IC(C1013) Replace the C1013 Not solved Main chip or PBA © Samsung Electronics Co., LTD | Confidential...
Page 50 MHL Problem Step2, 3 C1006 U1004 L1001 U1003 L1000 C1010 C1013 MHL IC © Samsung Electronics Co., LTD | Confidential...

This manual is also suitable for:

Gt-n5100

Samsung Galaxy Note 8.0 Repair Manual

Quick Links

Related Manuals for Samsung Galaxy Note 8.0

Summary of Contents for Samsung Galaxy Note 8.0

This manual is also suitable for:

Table of Contents