LG V500 Quick Start Manual

Quick start guide
LG-V500
To download the latest full version of the user guide,
go to www.lg.com on your PC or laptop.
MBM64358426 (1.0)
Installing the memory card
The memory card slot is located at the top of the tablet.
Turning on your tablet
Turn the tablet off before inserting or removing the memory
a
card.
Place your fingernail in the cutout and pull the memory card
b
tray out. Insert the memory card into the slot with the contacts
facing down. Carefully push the tray gently into the tablet.
NOTE: Do not remove the microSD card without unmounting
it first. Otherwise the memory card, as well as your tablet,
may become damaged and the data stored on the memory
card may get corrupted. To remove the memory card safely,
touch > Apps tab > Settings > Storage from the DEVICE >
Unmount SD card.
Press and hold the Power/Lock Key
for a couple of seconds.
TIP! If the device is locked and does not work, press and hold
the Power/Lock Key for 8 seconds to turn it off.
Overview
ENGLISH
IR LED
microSD Card
Slot
Earphone Jack
Front-Facing
Camera lens
Ambient Light
Sensor
Power/Lock
key
Volume keys
Touch screen
www.lg.com
Charging the tablet
NOTE: For your safety, do not remove the battery incorporated in the product. If you need to replace the battery,
take it to the nearest authorized LG Electronics service point or dealer for assistance.
WARNING! Use only LG-approved charging accessories. When using unapproved chargers or cables, it
may cause battery slow charging or pop up the message regarding charging delay. Or, unapproved chargers or
cables can cause the battery to explode or damage the device, which are not covered by the warranty.
QPair
By connecting your tablet and mobile phone via QPair, you can sync incoming calls, messages, and
social networking notifications between your tablet and mobile phone.
TOP
FRONT
• The charging port is at the bottom of the tablet.
• Insert one end of the charging cable into the tablet and the other end
into the charger, then plug the charger into an electrical socket.
• To maximize the battery lifetime, ensure that the battery is fully
charged before you use it for the first time.
Run QPair and tap Get started > Start on your tablet first and then run the same
a
steps on your phone.
Tip! QPair may not be pre-installed on the phone. Go to Google Play Store and search for
Qpair and install.
NOTE: QPair works with phones running Android 4.1 or later. Some features may be limited
depending on your phone model.
Bluetooth connection will be turned on automatically.
b
Microphone
Charger/USB
port
BOTTOM
Camera lens
Speakers
BACK