Philips 9000 Series Manual page 25

2
1
22_002_5883_1_Booklet Lux_A6_v2.indd 25
5 Place the shaving heads in the shaving head
holder.
Note: Make sure the notches on both sides
of the shaving heads fit exactly onto the
projections in the shaving head holder.
6 Place the retaining ring holder on the retaining
1
ring (1), place it on the shaving head (2) and
turn it clockwise (3) to reattach the retaining
ring. Repeat this process for the other retaining
3
rings.
-
Each retaining ring has two recesses that fit
exactly into the projections of the shaving
head holder. Turn the ring clockwise until
your hear a click to indicate that the ring is
fixed.
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads and
2
reattach the retaining rings. Do not place the
shaving head holder on a surface when you do
this, as this may cause damage.
7 Attach the shaving head holder to the bottom
part of the shaving unit ('click').
8 To reset the replacement reminder, press and
hold the on/off button for approx. 7 seconds.
Wait until you hear two beeps.
25
English
13/05/16 10:52